plastering on my day off

I took a day off work to do one of my favorite pass-times: plastering! Janeen popped her head in just as I was painting the walls with plasterweld, the special plaster adhering paint.

We’d already gone over the mesh tape and plaster washers with rough patches of joint compound, so that’s why the walls look splotchy white.

Janeen loves this photo. It’s funny that I’m standing on a step stool to plaster the area over the fireplace. “Real” plasterers would probably set up a platform to walk on.

The plastering went really well, mostly. The only problem I had was after I’d done the first coat on a couple of walls, I mixed a second batch that was much too runny. I added more dry plaster to it to thicken it up, but the process of starting, stopping, re-mixing took about 20 minutes off the 40 minute open time… I ran out of time and the plaster started setting in the bucket.

That plaster got wasted, but I’ve figured out that I can just mix another batch, and recoat the whole wall. No stressing necessary! It just added about 2 hours to my day, so I finished as it got dark. So much less of a mystery than my first attempt.

The finished walls came out really nice, I think.

Ooohhh, Smooth!

a monster

this post is a catch up. it’s got so much in it, it’s a monster…

Janeen putting decorative film on back doorclose up of decorative film

We bought decorative window film for the back door about eight months ago. We used to have a curtain on the other side of this door, but it started to smell really moldy, so I took it off. The decorative window film is intended to obscure the glass. Janeen’s done this once before, putting a plain frosted film on the windows of Popo’s bathroom. This weekend, Janeen put it on our back door. You have to clean the glass really thoroughly, the the film is sprayed with soapy water and squeegeed onto the glass. I’m making it sound easy. It’s meticulous work.

I got tired of trying to stuff insulation into the gap between the ceiling and the floor above, so I tore off the plaster ceiling in part of the garage that still needed insulation.  Quite a mess pulling it all down. It was already falling apart, and had holes, so needed some fixing anyway. Much more enjoyable.

Putting in the insulation was then super fast.

The following week, John helped us to put new gyp board on the ceiling. He came up with T shaped props, so that we didn’t need to hold it up on the ceiling while trying to screw it on.

Some places were really difficult to cut and fit.

John is the master of custom fit. He made a very carefully measured drawing of all the cuts before starting.

There were cutting and sawing noises for an hour, and then…

The floor was covered in powdered plaster dust, but the pieces of gyp board all fit perfectly. Janeen took a photo of the portable tool kit that her dad brings with him in his pockets…

We also spent half this weekend patching the plaster in the office. We’re using ‘hot’ (setting type) joint compound (“Easy Sand 90”) over fiberglass mesh tape and plaster washers. Next week I’ll plaster the lower half of the walls; but above the picture rails, it’s easier to just use a skim coat of the joint compound and sand it. The extra durability of plaster is not necessary where nobody can reach it.

And now that we’ve got the garage and insulation all done, spring is here. The white peach tree that Janeen’s aunt Janet gave us last year is in flower.

Oh, and Janeen knit a monster to give her friend’s son. The pocket on the front holds a baby monster.

stuffing fiberglass

Spring. We spent the first half of the weekend with Janeen’s family visiting; Popo kept talking about how many lemons were on the tree and insisted that Janeen’s mum bring lemon pie for her. Before they left, Jason and John went out to the garden and picked more lemons. The photo below is just one branch — after picking two bags of lemons. We’ve probably got two boxes of lemons still on the tree! Lemonade, anyone?

The peach tree is starting to flower, as is the jasmine. Janeen planted some freesia bulbs, and the gladiola bulbs Janeen planted last year are already starting to pop through the soil. The jasmine is really growing well on the East wall of our garden; quite amazing from just a twig that we took from a neighbor’s fence and rooted!

I tore out most of the Ice plant that I’d unwisely bought as cute little plants two years ago (it has very nice blue/purple flowers, but it overtakes the whole garden in a hurry), and sprinkled native California wildflower seed in its place. The snails had a great winter, practically eating everything — except the ice plant of course. I must have found fifty of them. Janeen took a photo as I was filling up a third container. The problem with urban gardens: Nature is all out of balance. Where are the hedgehogs, frogs, toads, snakes, caterpillars and birds when we need them?

We moved on to the garage ceiling on Sunday. I’ve left open holes in the gyp board for about a year, planning to stuff insulation in. I’d been procrastinating, because it’s such unpleasant work.

First we cut out strips of the gypsum board on the ceiling. The best method so far seems to be multiple passes with a utility knife to just cut through the board. (I’ve tried cutting it with a saw — messy! and it risks damaging the joists).

Using a magnet, I can find the nails, so that I can carefully cut around them. By not damaging the board when I take it down, we can reuse it.

Finally, cutting and stuffing the insulation batts in between the joists is really unpleasant. Even with a dust mask, goggles, gloves, and long sleeves, it gets everywhere. I should have just rented the insulation blower, and used blow-in insulation: a) it’s easier — drill a hole and blow it in b) it gives better insulation — fills the cavity completely c) it improves the fire resistance of the house d) it’s recycled e) did I say it’s a lot easier? Can’t think why I came up with the hair-brained idea to do this. The only advantage I can think of is that it’s much easier to service wiring within the ceiling space when there’s fiberglass batt insulation.

One really itchy, sweaty, awkward day later, half of the work had been done.

The cut out ceiling pieces fit right back in like a jigsaw puzzle. Almost no waste.

Fitting the gyp board was difficult around the new electrical box and the bracing I’d added to the beam over the garage door. We had to dismantle part of the conduit so I could slide the board underneath it. It’s no surprise the work takes us so long!

Janeen wired in the three-way switch again.

When Janeen’s family was visiting, John helped us pick up our new front door. It needs to be cut to fit into the door opening, and stained and sealed. Exciting.